Buehler Custom Sporting Arms LLC

One of the advantages that you have when you order a rifle with us is that your gun is truly going to be built for you, and each rifle is a one of a kind. For example, we try our best to make each stock to the customers dimensions. Factories don’t have the flexibility to do that. To determine the customers stock dimensions, it is always best to meet in person. We have a fully adjustable try gun which aids us in establishing proper fit.

When making the stock, most custom gunsmiths depend totally on pre-made patterns which they use to copy the stock on pantograph machines. We also utilize a Hoenig pantograph machine and some patterns, but primarily the machine is used for the inletting and often just for roughing out of the outside contour. Depending on the stock, about up to 85 % of the inletting can be pre-carved on the machine and it saves a lot of time. The remaining inletting is done by hand with chisels and scrapers.

The picture above is of me working on a butt stock.

The outside dimensions on our stocks vary from client to client. Most of the time it takes me less time to shape the inlet stock by hand versus to alter the outside of a pattern or spend a lot of time on making a new pattern. So the outside of the stock is carved oversize on the machine, or sometimes left completely as a block.

This picture is of the re-stocking of a vintage Holland & Holland Paradox. The metal is inlet and the stock is being shaped with hand tools.

The picture above is of the stocking of a custom Ruger #1 rifle.

The 2 pictures above are of the rough shaping of the Ruger stock.

Once everything is rough filed, I usually spend another full day to re-fine everything and to prepare the stock for the first sanding. The shaping of the stock is a lot of fun, a process that I enjoy very much. And my clients enjoy receiving pictures of their stock taking on it’s final form.

One of the quality aspects of a fine rifle is a clean appearance. What I mean is, the lines are kept crisp, flats are flat and even. Edges are clearly defined. Round surfaces are evenly round. Still, especially on the metal work, the comfort of handling should never be infringed on, and sharp edges should be blunted for handling comfort. This can be done without the loss of quality. A Customer should never” draw blood” on an edge of his rifle. Many considerations go into the building of a fine rifle.

The rifle in the picture is a close-up of a left hand .404 Jeffery rifle. Per customer request, a tang safety was installed to this rifle.

The combination of fine walnut and polished steel, made into a high precision instrument of beauty and style, yet capable of withstanding huge pressures and propelling a projectile faster then the speed of sound accurate into the center of a target, what’s not to love about it?
Beautiful mechanical mechanisms, combined with painstaking and loving executed craftsmanship, born from the desire to make each gun better then the one before. Figured walnut, each with it’s own character, never to be found on another gun.

Over the years I have developed a deep affection for steel and wood. Each material requires a somewhat different approach and skill set when working with it. I enjoy doing metal work and wood work equally and don’t prefer one over the other.  Since starting my apprenticeship in 1988 I always performed metal and wood work. Each I would miss terribly and I firmly believe that in this day and age a good gunmaker should be as versatile as possible.

In an effort to provide you with more information about my company and especially about the guns we are building, I have created this blog site. Please check back very soon, as I will start to add content to the site.

Thank you for your visit,

Sincerely,

Reto Buehler